KY-018 – Photo resistor module

R$ 32,81

Em estoque

wws Edmar / Dúvidas sobre o produto? Precisa de ajuda? Fale comigo.
SKU: 10310 - H7 Categoria:


Specificationsaccording to the spectral characteristics of the photoresistor has three photoresistor: Ultraviolet photosensitive resistance, infrared light-sensitive resistors, Visible photosensitive resistance;the main parameters are as follows:dark current, dark resistance: photosensitive resistance at a certain applied voltage, when the light is not irradiated when the flowing Current is called dark current. Applied voltage and dark current ratio as the dark resistance;Sensitivity: Sensitivity is irradiated by light sensitive resistor, the resistance value (dark resistance) when irradiated with light Resistance value (light resistance) the relative change in values.volt-ampere characteristic curve. Voltage characteristic curves are used to describe the resistance of the applied voltage and the photosensitive photocurrent relationship, On the photosensitive devices, the light current with applied voltage increases.temperature coefficient. Photoelectric effect photoresistor affected by temperature, at a low temperature portion photoresistor photoelectric Sensitive high sensitivity at high temperatures is low.rated power. Photosensitive resistor rated power is allowed for certain lines in the power consumed when the temperature rise High, its power consumption is reduced.SchematicArduino A5 –> Module Signal (S)Arduino 5V –> Module +5V (Pin2)Arduino GND –> Module GND (-)—————————————————Example code————————————————–//KY018 Photo resistor module int sensorPin = A5; // select the input pin for the potentiometerint ledPin = 13; // select the pin for the LEDint sensorValue = 0; // variable to store the value coming from the sensorvoid setup() { pinMode(ledPin, OUTPUT); Serial.begin(9600);}void loop() { sensorValue = analogRead(sensorPin); digitalWrite(ledPin, HIGH); delay(sensorValue); digitalWrite(ledPin, LOW); delay(sensorValue); Serial.println(sensorValue, DEC);}

Informação adicional

Peso 0.0000 kg
Dimensões 0.0000 × 0.0000 cm